Need help?Do you have a question about the Titan TTB582PMP and is the answer not in the manual?
Covers general and pump-specific safety warnings, including handling and electrical precautions for safe operation.
Identifies and labels all parts of the submersible pump with numbered diagrams and brief explanations.
Guides on unpacking, required accessories, hose/pipe system setup, and initial installation steps.
Explains the intended use, operating temperature, water compatibility, and automatic float switch control.
Details thermal protection, air bleed valve, general use, automatic/manual modes, and post-operation procedures.
Provides essential rules for care, cleaning methods, impeller maintenance, and power cord handling.
Lists common problems, their causes, and step-by-step solutions for quick self-resolution.
Instructions for recycling packaging and the product according to WEEE regulations for environmental protection.
Declares product compliance with EU directives, standards, and RoHS regulations.
Covers general and pump-specific safety warnings, including handling and electrical precautions for safe operation.
Identifies and labels all parts of the submersible pump with numbered diagrams and brief explanations.
Guides on unpacking, required accessories, hose/pipe system setup, and initial installation steps.
Explains the intended use, operating temperature, water compatibility, and automatic float switch control.
Details thermal protection, air bleed valve, general use, automatic/manual modes, and post-operation procedures.
Provides essential rules for care, cleaning methods, impeller maintenance, and power cord handling.
Lists common problems, their causes, and step-by-step solutions for quick self-resolution.
Instructions for recycling packaging and the product according to WEEE regulations for environmental protection.
Declares product compliance with EU directives, standards, and RoHS regulations.
This document describes the TITAN TTB582PMP Submersible Pump, a power tool manufactured by Titan Power Tools (UK) Ltd.
The TTB582PMP is a submersible pump designed for circulating water with a maximum temperature of 35°C. It has a rated input power of 750 Watts. With suitable accessories, the pump can be used for draining flooded rooms, pumping water to or from containers, removing water from wells and shafts, and draining boats and yachts. The product is fully submersible (watertight encapsulation) and can be lowered to a water depth of 7 meters. It is intended for private use only and not for commercial trade. The pump is not suitable for long-term circulatory use (e.g., in ponds, swimming pools, aquariums) and should only be used with water having a pH between 6.5 and 8.5. It must not be used for other fluids such as hydrocarbons, oils, corrosive, flammable, or explosive substances, or other chemical products. The pump operates with an automatic interval function controlled by a float switch. The float switch contains a ball that activates a switch, allowing the pump to automatically switch on or off based on the water level, which can be adjusted by changing the free cable length of the float switch cable. The pump is equipped with a thermal cut-out that automatically switches off the product if the motor overheats due to overload, clogged intake, or low/no water. An automatic air bleed valve releases air pockets from the pump body.
General| Brand | Titan |
|---|---|
| Model | TTB582PMP |
| Category | Water Pump |
| Language | English |
To Next Page
