EasyManua.ls Logo

Titan 100 User Manual

Titan 100
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Español Français English
Owner’s Manual
Read this manual for complete instructions
0911Form No. 0523893D
Contents
2 Important Safety Information
4 What’s in the Box?
5 Proper Use and Functions
6 Assembly
7 Pressure Relief Procedure
8 Load Material
9 Getting Material to Flow
10 Practice Spraying
12 Clear the Spray Tip
13 Clean the Spray Gun Filter
Français (page 25) / Español (página 49)
14 Clean the Inlet Filter
15 Short Term Storage
16 Cleanup - latex materials
18 Cleanup - oil-based materials
19 Cleaning the Spray Gun Components
20 Long-Term Storage
21 Cleaning the Sureo™ Valve
22 Troubleshooting
72 Parts List
76 Warranty
100
200
Questions?
Call Titan Technical Service at:
1-866-848-2698
Register your product online at:
www.titantool.com
Proper registration will serve as proof
of purchase in the event your original
receipt becomes misplaced or lost.
Series
Question and Answer IconNeed help?

Do you have a question about the Titan 100 and is the answer not in the manual?

Titan 100 Specifications

General IconGeneral
BrandTitan
Model100
CategoryWater Pump
LanguageEnglish

Summary

Important Safety Information

Grounding Instructions

Instructions for proper electrical grounding to prevent shock hazards.

Fire and Explosion Prevention

Precautions to prevent fires and explosions during operation.

Skin Injection Prevention

Warnings and procedures to avoid high-pressure fluid injection injuries.

What's in the box?

Unfolding the cart

Steps to unfold the cart model of the sprayer.

Proper use and functions

Controls and Functions

Details the various controls and their operational functions.

Assembly

Connecting Hoses and Tubes

Step-by-step guide for connecting the spray hose, suction tube, and return tube.

Pressure Relief Procedure

Steps for Relieving Pressure

Detailed instructions for safely releasing system pressure before maintenance or storage.

Load Material

Loading Material for Operation

Instructions for filling the sprayer with paint material for use.

Getting Material to Flow

Priming and Initial Spray

Steps to get the material flowing and prepare for spraying.

Practice Spraying

Spraying Techniques and Adjustments

Guidance on spray patterns, gun holding, and tip selection.

Spray Technique

Proper Spraying Motion and Overlap

Explains correct gun movement, wrist flex, and stroke overlap for even coating.

Troubleshooting: Clearing the Spray Tip

Procedure for Unclogging the Spray Tip

Steps to clear a blocked spray tip for consistent material flow.

Troubleshooting: Cleaning the Spray Gun Filter

Steps to Clean the Gun Filter

Instructions for removing and cleaning the filter inside the spray gun.

Troubleshooting: Cleaning the Inlet Filter

Procedure for Cleaning the Inlet Filter

Guide to cleaning the filter located on the suction tube.

Short Term Storage

Shutdown and Startup Procedures

Steps for temporarily storing and restarting the sprayer between uses.

Cleanup

Latex Material Cleanup Steps

Detailed steps for cleaning the sprayer after using latex-based paints.

Oil-Based Material Cleanup

Cleaning Procedures

Steps for cleaning the sprayer after using oil-based paints.

Cleaning the Spray Gun Components

Detailed Spray Gun Cleaning

Instructions for cleaning individual components of the spray gun.

Long Term Storage

Storage Procedures

Steps for preparing the sprayer for extended periods of non-use.

Cleaning the Sureflo Valve

Sureflo Valve Maintenance

Guide to cleaning and servicing the Sureflo valve for priming issues.

Troubleshooting

Sprayer Not Starting Issues

Diagnosing and resolving problems where the sprayer does not power on.

Priming and Material Draw Problems

Solutions for when the sprayer fails to prime or draw material.

Pressure Drops and Poor Spray Patterns

Addresses issues causing low pressure or distorted spray patterns.

Material Return Flow Issues

Solutions for when material flows through the return tube during spraying.

Spray Gun and Tip Troubleshooting

Spray Gun Leaks

Solutions for common spray gun leaks.

Spray Tip Assembly Leaks

Diagnosing and fixing leaks in the spray tip assembly.

Gun Will Not Spray

Troubleshooting steps for when the gun fails to spray.

Poor Spray Pattern (Tailing)

Solutions for tailing or inconsistent spray patterns.

Spray Tip Will Not Turn

Addresses issues with the spray tip being stuck or difficult to turn.

Parts List

Sprayer Parts

List of part numbers and descriptions for the main sprayer assembly.

Accessories

Available Accessories

List of optional accessories and their part numbers.

Limited Warranty

Warranty Terms and Exclusions

Details the warranty period, coverage, exclusions, and limitations.

Related product manuals