To Next PageTo Next Page
Need help?Do you have a question about the Titan DURO PROFESSIONAL Series and is the answer not in the manual?
General| Brand | Titan |
|---|---|
| Model | DURO PROFESSIONAL Series |
| Category | Water Pump |
| Language | English |
Explains symbols for temperature, electrical, and motor restart for safety.
Defines hazard signals like DANGER, WARNING, CAUTION, and NOTICE for risk assessment.
Details on water type, prohibited liquids, and warranty voiding for pump operation.
Explains the universal safety symbol and warning level indicators for hazard communication.
Emphasizes grounding plug and receptacle for shock prevention during use.
Covers installation codes, hazardous locations, flammable fluids, and pool/marine area usage.
Warns against running pump dry, using for potable water, and exposure to freezing temperatures.
Provides essential rules to avoid injury or property damage during pump operation and servicing.
Details on circuit breaker, GFI usage, and connecting to a grounded outlet.
Guidelines for safety gear, qualified personnel, and proper handling before installation.
Specifies location, material, size, and bottom condition for the sump hole.
Details on float assembly types and ensuring proper pump operation without interference.
Guidance on securing the pump, discharge pipe size, and recommended piping practices.
Describes how the pump starts and stops based on water level and float switch engagement.
Details on voltage, phase, plug type, and recommended fuse/breaker for the pump.
Explains the built-in protection that cuts power to prevent motor damage from overheating.
Recommends annual and periodic checks to ensure the pump is in operational condition.
Guidance on keeping the pump clean, checking the float, and testing pump activation.
Prohibits motor disassembly and reiterates electrical safety precautions for servicing.
Step-by-step instructions for safely disassembling, cleaning, and reassembling the pump.
A list and diagram identifying various parts of the submersible sump pump.
Troubleshooting steps for issues where the pump fails to start or makes no noise.
Diagnoses for pumps that run or hum but do not pump or have low capacity.
Solutions for issues where the float switch fails to shut off the pump.
Addresses problems causing the fuse or circuit breaker to trip when the pump starts.
Troubleshooting steps for pumps that cycle too frequently, indicating potential issues.
Details the two-year warranty against defects in materials and workmanship for the product.
Outlines conditions for warranty claims and exclusions such as abuse, neglect, or improper installation.
Lists specific causes like improper installation, voltage, or modifications that void the warranty.
Informs consumers about specific legal rights and limitations accepted upon product use.
