07
Getting started...
>Check the pressure vessel for signs of rust and damage
each time before operation. Do not use this product with
a damaged or rusty pressure vessel. If you discover any
damage, then please contact the customer service centre.
>Never leave the product unattended during use.
>The compressed air from your product is not safe for
breathing. Never inhale air from your product or from a
breathing product connected to the product.
>Do not modify or attempt to repair. Never drill into,
weld, or make any modications to the product or its
attachments.
>During operation, never point the product at yourself
or others, taking particular care to avoid the eyes and
ears. Risk of injury!
>Do not direct the nozzle or hose at animals or
bystanders.
>Warning! When spraying paint or cleaning agents the
ne mist produced could ignite. Do not smoke and
keep naked ames and other sources of ignition well
away from the work area. Make sure that the area in
which you are working has good ventilation and protect
your nose and mouth with a suitable face mask. Always
check the safety data sheets for substances being
sprayed and ensure manufacturers instructions are
followed.
>This air compressor must be used in a suitable
environment. There must be adequate ventilation, the
ambient temperature must be +5 / +40 °C. The working
area must be free from dust, acid vapour, explosive
gases and ammable materials.
>Do not direct compressed air at yourself, any other
person or animals. Do not direct any liquid or any other
material that is being sprayed by yourself towards any
other person or animals.
4/19/17 4:35 PM
EN
TTB797CPR
by TITAN
Safety information
To Next Page
Loading...
