How to fix a Titan Trimmer that won't start?
If the Titan Trimmer does not start, first ensure it is properly connected to a power supply. If it is connected, a specialist electrician should check the power cord, the plug, or for other electrical defects within the product.
Why is my Titan TTB823HDC Trimmer making excessive noise?
If your Titan Trimmer exhibits excessive vibration or noise, it might be due to a dull or damaged blade, which requires replacement. Alternatively, check if any bolts or nuts are loose and tighten them accordingly.
What to do if my Titan Trimmer does not reach full power?
If your Titan Trimmer isn't reaching full power, it could be due to several reasons. First, ensure you're using an extension cord suitable for operation with the product. Second, check that your power source (like a generator) has sufficient voltage. Finally, make sure the air vents are not blocked; if they are, clean them.
Why is my Titan TTB823HDC Trimmer giving unsatisfactory results?
If your Titan Trimmer is not providing satisfactory results, it could be because the blade is worn or damaged, in which case you should replace it with a new one. Also, ensure that the thickness of the branches you're cutting does not exceed the trimmer's capacity; only cut branches that comply with the specified capacity.
General| Power Source | Electric |
|---|---|
| Cutting Width | 23 cm |
| Weight | 1.6 kg |
| Line Diameter | 1.2 mm |
| Handle Type | Loop handle |
| Edging Facility | Yes |
| Telescopic Shaft | Yes |
| Voltage | 230 V |
General safety instructions applicable to all power tools, emphasizing reading manuals and avoiding hazards.
Guidelines for maintaining a safe and well-lit work environment, avoiding explosive atmospheres, and keeping bystanders away.
Precautions regarding power tool plugs, outlets, and avoiding contact with earthed surfaces to prevent electric shock.
Advice on user alertness, protective equipment, and preventing accidental starting of the tool.
Instructions for proper tool handling, usage, and care to ensure safety and prevent damage.
Safety warnings unique to hedge trimmers, focusing on blade handling and operational hazards.
Tips to minimize exposure to vibration and noise during operation, including PPE and work planning.
Guidance on emergency preparedness, memorizing safety instructions, and risk prevention.
Information on potential risks like vibration effects and electromagnetic fields, and necessary precautions.
Steps for unpacking, checking contents, and initial setup of the hedge trimmer, including safety warnings.
Instructions on safely removing and attaching the blade cover for operation and storage.
Detailed guide on connecting the hedge trimmer to the power supply, including extension cord usage.
Specifies the product's purpose, limitations, and intended applications for domestic garden use only.
Step-by-step instructions on how to safely start and stop the hedge trimmer using the safety and on/off switches.
Essential checks and practices for safe and effective operation of the hedge trimmer, including handling and breaks.
Recommendations for optimal trimming times and basic techniques for efficient hedge cutting.
Steps to follow after operating the hedge trimmer, including power disconnection, cooling, and blade cover attachment.
Guidelines for cleaning the product, including specific advice for air vents and stubborn dirt removal.
Specific instructions for cleaning and maintaining the hedge trimmer's cutting blades to ensure optimal performance and safety.
Information on power cord maintenance, replacement, and specific instructions for UK plug wiring.
Guidance on when and how to seek professional repair services for the product, as consumer repair is not possible.
Instructions for safely storing and transporting the hedge trimmer, including environmental conditions and securing the unit.
A table listing common product problems, their possible causes, and recommended solutions for self-troubleshooting.
Information on the environmentally responsible disposal of the product and its components, adhering to WEEE regulations.
Technical data including voltage, power input, speed, dimensions, weight, and protection class of the hedge trimmer.
Measured sound pressure, sound power levels, and hand-arm vibration values, including uncertainties and safety advice.
Interpretation of the product's rating label, explaining the meaning of the brand, series number, and model designation.
To Next Page
