To Next Page
J
jowilsonAug 5, 2025
What to do if my Titan 3PTTRIM Trimmer machine stops cutting?
- XxreedAug 5, 2025
If the Titan Trimmer stops cutting, inspect the cords, check the belt tension and wear, and verify the PTO rotation.
What to do if my Titan 3PTTRIM Trimmer machine stops cutting?
If the Titan Trimmer stops cutting, inspect the cords, check the belt tension and wear, and verify the PTO rotation.
How to fix poor cut quality of Titan 3PTTRIM Trimmer?
Poor cut quality with your Titan Trimmer can occur if the cord needs replacement, so replace the cord. Also, reduce tractor speed if it's too fast.
Why is my Titan 3PTTRIM scalping?
Scalping with a Titan Trimmer can happen if the arm or wheel adjustment is off. Check the frame level or the height of the hydraulic arms on the tractor.
Precautions to prevent accidents involving children and pets during operation.
Safety measures for the operator and bystanders from machine hazards.
Procedure for connecting the 3-point bracket to the tractor.
Instructions for connecting the trimmer/mower unit to the tractor bracket.
Steps for mounting and securing the trimmer's wheel assembly.
Guidance on determining the correct PTO shaft length for installation.
Procedure for inserting and securing trimmer cords in the head.
How to adjust the cord head for optimal trimming height.
Instructions for lubricating the wheel support for smooth operation.
Adjusting the wheel height to control the trimmer head's cutting level.
Safe procedures for engaging the trimmer head and PTO.
Methods for safely stopping the trimmer's cutting cords.
How to position the trimmer for easier maintenance tasks.
Guidelines for proper storage of the trimmer to prevent damage.
General
