Titan TTHTP26 - User Manual

Questions and Answers

A
Alexis ClarkNov 6, 2025
What to do if my Titan Trimmer engine won't start?
- R
  Rodney MorrisNov 6, 2025
  If your Titan Trimmer's engine won't start, make sure the fuel tank isn't empty; add fuel if needed. Ensure the stop switch is not set to STOP and that you're following the correct engine starting procedure. Check that the spark plug wire is firmly attached. If the spark plug is wet, dry it off, and if it's dirty, clean the spark plug wire. If you've pressed the primer during a warm start, release the throttle control lock-out, set the choke to Close, and try starting the engine several times; if that doesn't work, remove and dry the spark plug. If there's excess fuel in the combustion chamber, remove the spark plug and dry off the electrodes. Clean a soiled spark plug. If it's a cold start, press the primer 6 times before restarting. Ensure the gap between the electrode and spark plug is ...
E
Eileen TrujilloNov 12, 2025
How to fix a Titan TTHTP26 Trimmer that won't start?
- S
  scott29Nov 13, 2025
  If your Titan Trimmer's engine fails to start, begin by adding fuel if the fuel tank is empty. Check that the stop switch is not set to STOP and adhere to the engine starting procedure. Confirm the spark plug wire is firmly attached. If the spark plug is wet, dry it. For a dirty spark plug wire, clean it. If the primer was pressed during a warm start, release the throttle control lock-out, set the choke to Close, and attempt to start the engine multiple times; if unsuccessful, remove and dry the spark plug. If there's too much fuel in the combustion chamber, remove the spark plug and dry the electrodes. Clean a soiled spark plug. If it's a cold start and the primer hasn't been pressed, press it 6 times and restart. Verify the distance from electrode to spark plug is between 0.6-0.7 mm. Rep...
H
hlunaNov 21, 2025
How to troubleshoot starting issues with a Titan TTHTP26 Trimmer?
- E
  Eric WhiteNov 21, 2025
  To troubleshoot a Titan Trimmer that won't start, first, ensure you have fuel in the tank by adding fuel. Confirm that the stop switch is not in the STOP position and follow the engine starting procedure. Check that the spark plug wire is securely attached. Dry the spark plug if it's wet, and clean the spark plug wire if it's dirty. If you pressed the primer during a warm start, release the throttle control lock-out, set the choke to Close, and try starting the engine several times; if this doesn't work, remove the spark plug and dry off the electrodes. If there's excess fuel, remove the spark plug and dry the electrodes. Clean a spark plug if it's soiled. If it's a cold start and you haven't pressed the primer, press it 6 times and restart. Make sure the distance from the electrode to the...
S
Sergio YoungDec 1, 2025
What are common reasons a Titan Trimmer won't start?
- B
  brian34Dec 1, 2025
  If your Titan Trimmer engine isn't starting, the possible causes are: * The fuel tank is empty. * The stop switch is set to STOP. * The starting procedure is incorrect. * The spark plug wire is not firmly attached. * The spark plug is wet or soiled. * The primer was pressed at a warm start or not pressed at a cold start. * There's excess fuel in the combustion chamber. * The distance from electrode to spark plug is incorrect. * The fuel or mixture is incorrect. * The fuel filter is clogged. * The spark plug is defective. * The engine is cold. * The carburetor setting is incorrect. Suggested solutions include adding fuel, following the correct starting procedure, firmly attaching the spark plug wire, drying or cleaning the spark plug, adjusting primer usage, corre...