25
TTB879GRD by TITAN
WARNING! Always use the correct wheel according to the intended use!
For example, never use a wheel intended for grinding for cutting-off
applications or vice versa!
Observe the technical requirements of this product (see section
Technical specifications) when purchasing and using cutting / grinding
tools!
Cutting / grinding wheels become hot during use! Handle them carefully!
Wear protective gloves when handling wheels in order to avoid injuries
like burns and cuts!
Inspection of wheels
Prior to mounting, all wheels shall be inspected for damage and cracks. Wheels
which show any evidence of cracks, abusive handling or abusive storage should
never be mounted. Cracks in abrasive wheels are frequently not visible to the
naked eye.
Attaching
1. Press the spindle lock button (1) and turn the spindle until it locks in place
(Fig. 11).
2. Keep the spindle lock button (1) pressed and loosen the locking flange (10)
anticlockwise with spanner (15) (Fig. 12).
> 4 mm
Ø 230mm
grinding metal, stone
Grinding wheels
Shape Thickness/diameter Application
< 4 mm
Ø 230mm
cutting-off metal, stone
Cutting wheels
Shape Thickness/diameter Application
To Next Page
