Titan TTI932CHN - Page 33

33
TTI932CHN
In
more
detail...
EN
General operation
1. Check the product, its battery pack and charger as well as accessories for
damage before each use. Do not use the product if it is damaged or shows
wear. Take care of any problem you nd or have the product checked by
qualied specialist.
2. Double check that the accessories and attachments are properly xed.
3. Check the chain lubrication oil level regularly, rell if necessary.
4. Always hold the product on its handles. Keep the handles dry and free from
lubricant to ensure safe support.
5. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
6. Switch the product off immediately if you are disturbed while working by
other people entering the working area. Always let the product come to
complete stop before putting it down.
7. Do not overwork yourself. Take regular breaks to ensure you can
concentrate on the work and have full control over the product.
8. Before switching the product on, check whether it has been assembled
correctly and all the moving parts are running smoothly!
9. While working, ensure that the product does not strike hard objects, as this
can cause damage.
WARNING!
In some countries regulations dene at what time of the
day and on what special days products are allowed to be used and
what restrictions apply! Ask your community for detailed information
and observe the regulations in order to preserve a peaceful
neighbourhood and avoid committing administrative offences!
Basic operating / cutting procedure
WARNING!
Chainsaws by their very nature are extremely
dangerous machines and should be handled with respect!
We strongly recommend that before use of this product, you
attend a chainsaw training course to familiarise yourself with the
maintenance and usage of these products!
Thoroughly read this manual and adhere to all safety instructions
at all times. Manufacturer will not be held liable for any accidents
/ injuries caused due to misuse or incorrect maintenance of this
product!
Product functions/Operation