TJEP RC20A - Contents of the TJEP RC20 A;RC30 A Rod Cutter Package; Disposal of Batteries; Functions and Applications; Service

English
127
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool.
• Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
anyotherconditionthatmaya󰀨ectthepowertool’soperation.Ifdamaged,havethepowertool
repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and blades in accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
di󰀨erentfromthoseintendedcouldresultinahazardoussituation.
Service
Haveyourpowertoolservicedonlybyaqualiedrepairpersonusingonlyidenticalreplacement
parts. This will ensure that the safety of the power tool is maintained.
Disposal of batteries
Batteries contain substances that can be harmful to human health and the environment if they are
not handled properly. Batteries are marked with the crossed trash bin. It symbolises that waste batte-
ries must not be disposed with unsorted waste but must be collected separately.
It is important that you hand in your waste batteries to the collection points that are established. In
this way, you help to ensure that the batteries are recycled in accordance with legislation and do not
unnecessarily damage the environment. Your local waste authorities can inform you how to dispose
and recycle this type of battery correctly.
Contents of the TJEP RC20A/RC30A Rod Cutter package
Upon purchasing the TJEP RC20A/RC30A Rod Cutter, open the carrying case and check the cont-
ents for the following:
1. TJEP RC20A/RC30A Rod Cutter with blade mounted : 1 unit
2. Removable Side Handle and chip collector attachment: 1 unit
3. Allen Wrenches for Blade Removal and Installation: 1 unit
4. Additional TJEP RC20A/RC30A blade: 1 unit
5. Additional battery: 1 unit
6. Operation Manual: 1 copy
If anything is missing or damaged please do not return this packaged unit to the distributor, please
call Kyocera Unimerco Fastening: +45 9714 1440.
Functions and applications
This section describes the functions, applications, service environment and other aspects of the
TJEP RC20A/RC30A Rod Cutter
TJEPRC20A/RC30ARodCutterisapowertooldevelopedforfastande󰀩cientcuttingofvarious
ferrous and non-ferrous materials. This multipurpose tool can be used by a variety of contractors ho-