3
2. INSTALLATION
2. 1 SIM-CARD INSTALLATION
1) Open the rear cover by removing the screws with a screwdriver.
2) Push the metal piece forward
3) Place the SIM-card into the card slot.
4) Press the metal piece back into its original position.
5) Push the metal piece back into place.
2.2 USE THE GPS DEVICE
Turn on the unit outdoors by pressing the “on/off” button until the indicator is on.
For first use, please initialize the unit and restore it to default setting. (Please refer to 3.1 for instruction.)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the GPS signals. The
indicator will keep flashing every 3 seconds when the unit has received the signals.
When this unit receives GPS signals normally, you can use it and do any setting as the instructions of this
manual.
To Next Page
Loading...
