TK-STAR TK915 - SMS Tracking and Configuration; SMS Tracking; Admin Number Setting; Over-speed Alarm Setting

 The device automatically turns off when the SIM card is removed.
4.SMS TRACKING
4.1. Call the SIM card phone number in tracker,you will receive a Google Maps link of position,
or sending message “G123456#” to SIM card phone number in tracker .
E.g:
4.2. Admin number setting (After admin number setting, all SMS operations to the device are under this
number only.)
Command: admin123456 phone number（This phone number is your own mobile phone number , not the
SIM card number in tracker .）
Reply：admin ok
E.g：admin123456 13265790180
When the unit is in over-speed alarm, shake sensor alarm, or low battery alarm, it will send alert to the admin
number.（13265790180）
Admin number Canceling:
Command ：noadmin123456
Reply：noadmin ok
4.3. Over-speed Alarm setting（It works only in continuous positioning mode.）
Over-speed Alarm setting:
Command ：speed123456 070（Suppose speed is 70km/h）
Reply：speed ok
E.g：
When the unit speed is over 70km/h, it will send message “speed alarm!” to the admin number every 5
minutes.
Over-speed Alarm canceling ：
Command ：nospeed123456
Reply：nospeed ok