4.4. Shake Alarm setting
Command:shock123456
Message Reply:shock ok
E.g:
Note:Pls keep the tracker being stationary for 5 minutes, this function will work.
The tracker will send SMS “sensor alarm!” to the admin number when the unit get shocked.
Shake alarm Canceling:
Command:noshock123456
Reply:noshock ok
4.5.Loosing Alarm setting
Command:loosing123456
Message Reply:loosing ok
E.g:
Not
e:
设备背面带有防拆除感应传感器,如果感应传感器被遮挡后再不被遮挡,设备会产生报警
”Loosing
alarm!”
发短信给中心号码和
SOS
号码。(出厂默认打开)
Loosing Alarm Canceling:
Command:noloosing123456
Reply:noloosing ok
4.6. Device working mode setting
Sleep by time mode setting:
Command:sleep123456 time
Reply:sleep time ok
E.g:
(Tracker only works for 5 minutes after being waked up, and back to sleep mode, GPS shut off, GSM
works in low consumption mode. SMS command, calling tracker can wake up the tracker.)