TK-STAR TK915 - Time, Reset, and SMS Message Explanation; Terminal (local) Time Setting; Reset Hardware; Explanation of Parameters;Codes in SMS Message

Sleep by shock sensor mode setting: (Factory setting is “Sleep by shock mode“)
Command：sleep123456 shock
Reply：sleep shock ok
E.g：
(No shock for 5 minutes, the tracker will work in “sleep by shock” mode, GPS shut off, GSM works in low
consumption. Vibration, SMS, calling can wake up the tracker.)
4.7 Terminal (local) Time Setting(factory setting GMT 0)
Command：timezone123456 local time zone
Reply：time ok!
E.g： timezone123456 +1 timezone123456 -1 Timezone123456 0
4.8Reset Hardware
Command：begin123456
Reply：begin ok
E.g：
5. EXPLANATION OF PARAMETERS/CODES IN SMS MESSAGE
Pic（1） Pic（2）
Pic 1：Replied real-time tracking information under GPS satellites signal.
 Lat:22.63952 lon:114.17122 Positioning of the latitude and longitude values.
 Spd：000 This refers to the device moving speed. The unit is km/h.
 T:24/09/15 16:00 real-tracking time, the Default is London time. You can set language and
time zone in APP.
 Bat：100% The battery value is between 10% and 100%. Once it is less than 30%, it
alarms.
 2015070203: Device IMEI No. to log in APP and platform.