ООО «ТЛК Трейд» | 196158, г.Санкт-Петербург, Пулковское шоссе, д.30, корп.4, оф. 213В (юр.) | ИНН 7810592830 КПП 781001001
р/с 40702810068000007550 | к/с 30101810200000000704 | Филиал ОПЕРУ ОАО Банк ВТБ в Санкт-Петербурге | БИК 044030704
ОКПО 66035862 | ОКАТО 40284565000 | ОГРН 1107847196060 | т.(812)6499888 | http://www.tlct.ru http://www.rftel.ru
mail@tlct.ru
Properties
MAC address: Factory-set MAC address is guaranteed to be unique. You
cannot configure this address.
FW Version: the version of the FPGA software (note that this version number
will be changed automatically according to the TS/IP settings (‘IP In’ or ‘IP Out’).
SW Version: the version of the main software.
Factory Settings
All the user configurable parameters will be set to the factory default settings,
including IP address and the unit name.
USB Upgrade
USB Status: it can check the status of USB stick in USB port when you make
upgrade
Force upgrade: It will force upgrade the file in USB stick
Ntp set
you can sync device with your NTP(Network Time Protocol) server
NTP Server IP: set the IP address of NTP server
NTP Interval(s): Set the NTP interval time
Time Zone: set the time zone of your location
Date: set the date
Time: Set the time
Get Time from Server: Get time from NTP server directly
HTTP Login
Modify the username and password for the WEB management.
The default username: root
The default password: 12345
Machine Type
not open to customer
4. Control with web server
DCH-3100P can be controlled by WEB. User can type IP address of DCH-3100P in browser. It will
show login pop-up. The default user name is root and password is 12345. If you forget this username
and password, you can use front panel button to change it. You can set it in SystemHTTP login
menu. The parameters are the same as Chapter 3.3.
4.1 Status
User can monitor the working status of output and input. You also can set auto refresh time here.
“Status Refresh” is used to refresh status manually.
To Next Page
Loading...