TM RACING 450 - Motorcycle Model Recognition; TM Racing Motorcycle Model Identification; Engine Serial Number Location

1
The displacement, type of power source and type of use dene the motorcycle model and engine of each TM Racing motorcycle.
The combinaon of codes 1 and 3 idenes the standard engine type. The combinaon of the three codes fully idenes the motorcycle model.
All 3 codes are usually used in this Manual, to specify the motorcycle model to which certain informaon refers.
If only codes 1 and 3 are indicated, followed by the word “ALL”, it means that the informaon relates to all motorcycles with standard engine,
regardless of the type of use.
Code 2 (Type of Use) used alone means that the informaon refers to all motorcycles with that type of use, regardless of displacement and
power source.
All EN/SMR/SMM models are equipped as standard with electric start (E.S.) as well as kick start ( K.S.). MX/SMX models have K.S. as standard
and may be equipped with E.S. as an opon.
Please make a note of your motorcycle’s serial numbers in the boxes below.
When it is necessary to contact TM for spare parts, updates or to report any issues, always quote the model, displacement, year of manufacture
and, above all, the frame serial number and engine serial number.
RECOGNIZING TM RACING MOTORCYCLE MODELS
EXAMPLE OF MOTORCYCLE MODEL
DISPLACEMENT
250 = 250cc
300 = 300cc
TYPE OF POWER SOURCE
Fi = INJECTION
TYPE OF USE
EN = ENDURO
MX = MOTOCROSS
FT = FLAT TRACK
SMR = ROAD SUPERMOTO
SMM = SINGLE ARM SUPERMOTO
SMX = COMPETITION SUPERMOTO
TYPE OF START
(ONLY WHEN INCLUDED AS AN OPTIONAL)
E.S. = ELECTRIC START
K.S. = KICK START
RECOGNITION
450Fi MX E.S.
2
1
3
ENGINE SERIAL NUMBER
The engine serial number (1) is embossed into the rear part of the engine,
near to the shock absorber.
Make a note of this number in the relevant space at the beginning of the
manual.