TM Easytherm 1 - Page 5

TM INDUCTION HEATING
5
ET 2.0 |
Total 50Hz RMS eld for magnetic measurement results. Max. magnetic ux in safe
exposure area, according to the German BG 11 Regulations is 423 µT.
SAFETY FEATURES
Should an error occur during the heating process, the induction heater will automatically stop.
The corresponding error will be displayed on screen. More information about the types of errors
can be found in chapter 6 - TROUBLESHOOTING.
An induction heater produces an electromagnetic
eld within a coil to transfer energy to a workpiece.
The table below shows values of the ux density in
microTesla (µT). These measurements can be used
as a guide conforming to local regulations regarding
the maximum time exposure to magnetic elds.
Dierent congurations may give dierent values.
MP2x
60
MP1x
30
MP3x
90
30
60
90
MP1y
MP2y
MP3y
X
(cm)
Y
(cm)
MP1x (30 cm) 80 110 160 600 400
MP2x (60 cm) - - - 90 160
MP3x (90 cm) - - - - 80
MP1y (30 cm) 90 160 270 270 400
MP2y (60 cm) - - - 100 160
MP3y (90 cm) - - - - 90
Easytherm 1 2 3.5 15 30
Measurement position (cm) B-eld
total
(µT)