Need help?Do you have a question about the TM PoE and is the answer not in the manual?
Details the requirement for a PoE enabled LAN and connection methods (switch or injector).
Explains default DHCP setup for IP, Netmask, Gateway, DNS, and changing time server.
Step-by-step instructions for mounting the clock to drywall using anchors and screws.
Accessing the clock's configuration web page and the default password "tmachine".
Setting primary and backup SNTP servers for time synchronization.
How DHCP option 42 can provide NTP server addresses to the device.
How to set the clock's offset from Greenwich Mean Time.
Choosing between automatic, disabled, or custom DST settings.
Setting the start and stop dates for Daylight Saving Time.
Enabling the countdown timer to trigger an alarm via the relay.
Changing the clock's password, with a 12-character limit.
Details the clock's internal relay connector and pinout for external systems.
Common reasons and solutions for not being able to access the clock's web interface.
To Next Page
General