This document describes the TMG-MSC1220 12' x 20' Metal Garage Carport Shed, a robust and versatile shelter designed for various uses.
Function Description
The TMG-MSC1220 is a metal garage carport shed primarily intended to provide shelter and protection for vehicles, equipment, or other items from environmental elements such as sun, rain, and snow. Its sturdy construction and design aim to offer a reliable and durable outdoor storage solution. The manual emphasizes the importance of secure installation, including the use of steel anchor cables and anchor bolts on concrete pads, to ensure stability and warranty validity. It also highlights the need to check all components and trusses for proper assembly and to ensure the whole structure is rectangular, with color steel tiles fitted correctly to prevent water leakage.
Important Technical Specifications
The TMG-MSC1220 carport shed boasts several key technical specifications:
- Overall assembled size: W3.66 m x L6 m x H2.9 m (12 ft x 19.7 ft x 9.5 ft).
- Width: 3.66 m / 12 ft.
- Length: 6 m / 19.7 ft.
- Ridge peak height: 2.9 m / 9.5 ft.
- Shoulder wall clearance height: 2.4 m / 7.9 ft.
The structure is composed of various parts, each with specific dimensions and quantities:
- Peak arch tube (Part 1): L483mm, 5 pieces.
- Middle rafter tube (Part 2): L1280mm, 10 pieces.
- Shoulder tube (Part 3): L1034mm, 10 pieces.
- Sidewall tube (Part 4): L1524mm, 10 pieces.
- Short casing (Part 4A): L198mm, 30 pieces.
- Side edge crossbar (front and rear truss) (Part 5A): L1570mm, 4 pieces.
- Side edge crossbar (middle truss) (Part 5B): L1500mm, 4 pieces.
- Base plate (Part 6): W150xL200mm, 10 pieces.
- Metal sheet (front and rear truss) (Part 7): W870xL1620mm, 14 pieces.
- Metal sheet (middle truss) (Part 8): W870xL1600mm, 14 pieces.
- Edge protector (Part 9): L2000mm, 6 pieces.
- Edge buckle (Part 10): L200mm, 4 pieces.
- Sleeve (Part 11): 8mm, 2 pieces.
- Steel cable mounting plate (Part 12): L100mm, 4 pieces.
- Anchor hook (Part 13): φ16x120mm, 4 pieces.
- Steel cable (Part 14): φ6x3.3m, 4 pieces.
- Expansion bolt (Part 15): φ16 x 150mm, 20 pieces.
- Waterproof silicon sealant (Part 16): 2 pieces.
- Caulking gun (Part 16A): 1 piece.
- Hex bolt (Part 17): M10x60mm, 140 pieces.
- Self tapping screw (Part 18): 5.5x25mm, 216 pieces.
- Blind rivet (Part 19): φ3.2x5mm, 50 pieces.
- Corner protector (Part 20): 4 pieces.
The installation process involves several steps, including baseplate positioning with diagonal measurements (X=Y) to ensure squareness, installation of expansion bolts, assembly of trusses using hex bolts and self-tapping screws, putting up all trusses, installing color iron tiles with specific overlaps and waterproof silicon sealant, installing front and rear edging strips and edge buckles, connecting crossbars, and finally, installing the wire ropes with anchor hooks.
Usage Features
The TMG-MSC1220 carport shed is designed for general outdoor shelter. Key usage features include:
- Versatile Shelter: Can be used to protect vehicles, machinery, or other items from sun, rain, and light snow.
- Durable Construction: Made with metal components and color iron tiles for longevity.
- Secure Installation: Requires anchor bolts on concrete pads (at least 6" thick) and steel anchor cables for stability, especially in areas with heavy snow or high winds.
- Weather Resistance: The design incorporates waterproof silicon sealant and proper tile overlap to prevent water leakage.
- Modular Design: The assembly process involves connecting various pre-fabricated parts, allowing for a structured installation.
- Safety Precautions: The manual explicitly states the need for safety helmets, protective eyewear, clothing, and safety harnesses for all elevated workers during assembly. It also advises against assembly in high winds or heavy snow.
Maintenance Features
Proper maintenance is crucial for the longevity and safety of the TMG-MSC1220 carport shed. The manual outlines several maintenance recommendations:
- Regular Inspections: Walk around and inspect the shelter periodically to ensure all components are still firmly secured and the whole shelter is well supported. Check all bolts and nuts, base plates, ropes, and tie-downs regularly.
- Snow Removal: Snow accumulating on the fabric cover must be removed as soon as possible. If snow becomes solid ice on the cover, it will increase the weight on the roof and may collapse the shelter or reduce its lifespan.
- Snow Load Management: Do not leave any snow load on the roof overnight. Keep 3 feet of clearance on all sides at all times. Do not allow snow to accumulate and pile up on the sides of the building. Otherwise, the pressure from the sides will push inwards and could lead to a collapse.
- Warranty Validity: Adhering to the installation and maintenance guidelines is essential to ensure the product warranty remains valid. Any modifications required to meet building codes and regulations are the sole responsibility and expense of the owner.
- Professional Consultation: If a permit is required for installation, it is crucial to check local building codes and regulations. If the shed does not meet engineering requirements, it may be necessary to obtain a permit or modify the shed to meet the requirements.
- Damage Prevention: Following the steps for stability and durability, especially in areas where heavy snow or high winds are common, will help prevent any damage due to snow or wind loads.
- Tightening Bolts: All bolts installed in the final step should be tightened. Do not over-tighten the bolts, otherwise the pipes or components will be damaged.
The manual also provides contact information for TMG Industrial for any missing parts or questions regarding assembly.
Need help?
To Next Page
General
