EasyManua.ls Logo

TnB SPCAMHD2 - Powering On and Off

TnB SPCAMHD2
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
EN
Basic principles
Before using your Camera « Adrenalin » for the first time :
Insert a microSD, microSDHC™ or microSDXC™ card into the slot of the card with the label
facing the front. We recommend using the card of Class 10 or higher speed.
Charge the battery. The lithium-ion battery comes partially charged.
To charge it, connect the USB cable that is provided for this purpose to the camera and the
other end of the cable to a power supply such as a computer or a USB charger.
To maximise your battery life, operate a full charge before the first use.
Basic principles
ON AND OFF
To turn on the device :
Press
and release the pressure. A home screen lights up, accompanied by an audible
indicator.
To turn off the device :
Press for two seconds and release the pressure. The home screen is turned off,
accompanied by an audible indicator.
OK
_Notice_SPCAMHD2.indd 29
06/05/2015 12:18