VIDEO mode
VIDEO
To record a video, make sure that the camera is in video mode.
If the Video icon
is not displayed on the LCD screen of your camera, press multiple
times until it appears.
To start recording :
Press and release the pressure. The camera emits a beep and the red and green status
indicator lights blink during the recording, a red dot also appears on the LCD screen.
To stop recording :
Press and release the pressure. The camera emits a beep and the red and green status
indicator lights stay on, but do not blink, the recording is then interrupted.
1080P 1080P
00:00:00 00:00:00
VIDEO mode display
Without recording
(no red dot)
VIDEO mode display
During recording
(appearance of a blinking red dot)
To Next Page
Loading...