Pairing Operation
Bluetooth Name
Tnicer-T4
Bluetooth pairing with cell phone
Attention：
1. Turn on Bluetooth: In the power-on state, press and hold the
[multi-function button] for 3 seconds, until the red and blue lights flash
alternately.At this time has entered the Bluetooth waiting to connect state.
If you have connected to other devices, the blue light will flash
slowly.Please reset and turn on the device again.
2. Search cell phone Bluetooth: In the state of red and blue lights
alternately flashing, open the cell phone Bluetooth settings, search for
nearby Bluetooth devices, select "Tnicer-T4" for connection pairing, after
successful connection there will be a voice prompt "device is connected",
then the Bluetooth pairing success.
1. If you have connected to other phones, the blue light will flash slowly, please
reset and turn on the device again.
2. Search for cell phone Bluetooth, select "Tnicer-T4" connection pairing, click
to connect.When the pairing is successful, it will be accompanied by the voice
prompt "device is connected", and the Bluetooth connection is successful. If
the connection fails, you can click "Forget this device" in the Bluetooth list on
your phone and search for the connection again.
Settings
Bluetooth Search
To Next Page
Loading...
