Specifications
Model
Input
Input impedance
Rated input level
Max. input level
Sense input
Sense input impedance
Output
Output impedance
Rated output level
Max. output level
Crossover frequency
Distortion
Hum & Noise
Indicators
Front panel operation
Power requirement
Power consumption
Weight
AC-M1
Electronically balanced (Cannon XLR-3-31
or equivalent)
20 (Balanced)
+4dB (Pin No.3 : HOT, No.2 : COLD and
No.1 : GND)
+26 dB
Electronically balanced (Binding post)
10
Electronically balanced (Cannon XLR-3-32
or equivalent)
600 (Balanced)
+4dB
+26 dB (Balanced)
1 kHz
Less than 0.05%(+4 dB 1 kHz)
Less than -85 dB (20 Hz~20 kHz)
Power : green LED
FC : green LED
Sense input : green LED (LOW SENSE, HIGH SENSE)
Limit : red LED (LOW LIMIT, HIGH LIMIT)
Input level control
Power switch
Mode switch
FC switch
AC Mains, 50 Hz/60 Hz
18 W (120V AC version)
16 W (220V~240V AC version)
5 kg (11.02 Ib.)
Specifications are subject to change without notice.
0dB=0.775Vrms
Accessories
Fuse (0.63A 120V AC version / 0.2A 220V~240V AC version)
Warranty card (for USA and Canada only)
Operating instructions
1
1
1
10
To Next Page
Loading...
Need help?
General