Features
Time lag between speaker units in the speaker system is corrected.
Provided the frequency dividing network function.
Accorded with phase at the crossover frequency.
Limiter is provided to prevent the speaker units from over-driven and damage in each frequency range
and not to arise power amplifier clipping.
An internal equalizer circuit makes the speaker frequency response flat by minimizing the influence of
reflected waves produced when the speaker is directly installed on the floor.
Strictly selected parts and component parts are used for materializing quality sound.
Can be mounted on 19" EIA standard rack. (one size)
Space-saving design, yet dual channel construction. Either the SR-M1 or SR-M2 can be selected in each
channel.
Input and output are used the electronically balanced XLR type connector.
(Pin No.3 : HOT, No.2 : COLD and No.1 : GND)
4
To Next Page
Loading...
Need help?
General