Toa F-2352SC User Manual

INSTRUCTION MANUAL
CEILING SPEAKER SYSTEM F-2352SC
1. SAFETY PRECAUTIONS .......................... 2
2. GENERAL DESCRIPTION ........................ 3
3. FEATURES ................................................ 3
4. NOMENCLATURE AND DIMENSIONS .... 3
5. INSTALLATION ......................................... 4
6. REMOVING THE SPEAKER
FOR MAINTENANCE ................................. 9
7. REPAINTING THE SPEAKER .................. 10
8. SPECIFICATIONS .................................... 11
Accessories ............................................... 11
Optional Components ................................ 11
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TABLE OF CONTENTS

Toa F-2352SC Specifications

General

Frequency Response	70 Hz - 20 kHz
Impedance	8 Ω
Sensitivity	90 dB (1 W, 1 m)
Rated Input	60 W
Input Connector	Push-in connector
Directivity Angle	90° (H) × 90° (V)
Speaker Component	5" Woofer, 1" Tweeter
Mounting	Wall Mount

Summary

Safety Precautions

Warning Precautions

Details critical warnings regarding installation, handling, and potential hazards like falling units or electric shock.

Installation

Mounting Configurations Overview

Lists six methods for mounting the speaker, including direct, frame, larger hole, and anchor bolt configurations.

Ceiling Hole Preparation

Details cutting the mounting hole in the ceiling panel using a paper pattern and specifying dimensions.

Mounting to Weak Ceiling Panels

Explains the use of the HY-RR2 reinforcement ring for secure installation on weak ceiling panels.

Mounting to Ceiling Frames

Describes using HY-RR2 with HY-TB1 for mounting to ceiling frames or suspended ceilings.

Mounting in Oversized Holes

Details using HY-RR2 with HY-TR1 for installation in ceiling holes larger than standard.

Mounting with Anchor Bolts

Exposed Installation (Suspension Pipe)

Speaker Cable Connection

Flush Mounting Procedure

Exposed Mounting Procedure

Input Impedance Setting

Explains how to set the input selector switch to the desired impedance and warns against incorrect usage.

Front Grille Attachment

Removing the Speaker for Maintenance

Detaching the Front Grille

Removing the Speaker Unit

Specifications