How to adjust the SIP phone volume on Toa Speakers?
If sound output is too quiet, adjust the Input Volume (SIP) setting on the Audio Settings screen. If the sound is too loud and distorted, reduce the volume of the SIP phone or device.
How to fix low microphone volume in VMS Broadcasting with Toa IP-A1PC238?
If the microphone volume is too quiet, adjust the Input Volume (VMS Broadcasting) on the Audio Settings screen. If the volume is too loud and breaking up, reduce the volume of the source microphone.
How to adjust the local broadcasting volume on Toa IP-A1PC238?
Check the following: * Is the equipment connected to the LINE/MIC IN terminal set to the correct output volume? * Is the gain setting for the device’s LINE/MIC IN terminal correct (Check the DIP switch.) * Is the LINE/MIC IN volume control set to the correct volume? * Adjust the Input Volume (Local Broadcasting) on the Audio Settings screen.
How to adjust multicast channel volume on Toa Speakers?
By adjusting the Input Volume (Multicast 1 – 20) on the Audio Settings screen, you can set the appropriate volume for each multicast channel.
How to supply power to Toa Speakers?
Connect the device to a PoE switching hub to supply power.
What to do if connected equipment exceeds PoE switching hub's maximum power supply capacity for Toa IP-A1PC238 Speakers?
Replace it with a PoE hub that provides ample power supply capacity.
What to do if the webpage is not displayed correctly for Toa IP-A1PC238 Speakers?
Please access using Microsoft Edge or Google Chrome.
How to troubleshoot sound file volume issues when using the PLAY button on the Pattern Registration screen for Toa Speakers?
Check that the sound source itself is not cracked, that the “Input Volume” set in the pattern is not too loud, and that the “Master Volume” is not too loud.
How to check if the status indicator switches to broadcasting status on Toa IP-A1PC238 Speakers?
Check the operating status on the webpage Status screen.
Why is the SIP Registration Status not set to 'Registered' on Toa IP-A1PC238?
Check the following settings on the SIP Settings screen: * Is SIP Account Active turned ON? * Is the SIP Server Address/Port setting correct? * Are the User ID, Password, and Authentication ID settings correct?
To Next Page
General
