Toa NX-100 Operation Manual

4
3. MAKING BROADCASTS
Step 1. Start the NX-100 Operation Program by double-clicking on the operation program's desktop shortcut
or the "nx100_control.jar" application created in the program's installed folder.
The operation screen is displayed.
(Operation screen example)
Step 2. Press either the Selection or Group button to select broadcast locations.
Multiple locations can be simultaneously selected. Selected buttons are highlighted in white. When
the Group button is pressed, all the Selection buttons programmed into the Group button are also
highlighted in white.

Toa NX-100 Specifications

General

Brand	Toa
Model	NX-100
Category	Adapter
Language	English