Toa VX-3016F User Manual

INSTALLATION MANUAL
INTEGRATED VOICE EVACUATION SYSTEM
VX-3000 SERIES
Thank you for purchasing TOA’s Integrated Voice Evacuation System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1134
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany
1134-CPR-195
EN 54-16: 2008
Fire Detection and fire alarm systems - part 16: Voice alarm control and
indication system for fire detection and fire alarm systems for buildings
Options:
Manual silencing of voice alarm condition
manual reset of voice alarm condition
voice alarm condition output
indication of a fault related to voice alarm zones
voice alarm manual control
emergency microphones
redundant power amplifiers
16
DOP 16-004
When an EN 54-16 compliant VX-3000 system has to be installed, then carefully read the separate manual
titled "APPENDIX: ADDITIONAL INSTALLATION INSTRUCTIONS FOR AN EN 54-16 COMPLIANT
SYSTEM" and follow up the installation and configuration requirements explained therein. This APPENDIX
contains the basic description of settings and installations, so please refer to the general instruction
sections in this document for more details.

Toa VX-3016F Specifications

General

Brand	Toa
Model	VX-3016F
Category	Microphone system
Language	English

Summary

Chapter 1 NOTE

1. SAFETY PRECAUTIONS

Crucial safety instructions for installation and use to prevent hazards and ensure proper operation.

Chapter 2 NOMENCLATURE AND FUNCTIONS

1. VX-3004F/3008F/VX-3016F VOICE EVACUATION FRAME

Detailed explanation of the front and rear panel components and indicators of the VX-3000F series frames.

2. VX-015DA/030DA/050DA DIGITAL POWER AMPLIFIER MODULE

6. RM-200SF, RM-300X, AND RM-500 MICROPHONES

Explanations of the features, operation, and connections for the RM-200SF, RM-300X, and RM-500 remote microphones.

11. RM-500 REMOTE MICROPHONE

Features and operation of the RM-500 desktop remote microphone with LCD screen and function keys.

Chapter 3 INSTALLATION AND SETTING PROCEDURES (HARDWARE)

1. VX-015DA, VX-030DA, AND VX-050DA DIGITAL POWER AMPLIFIER MODULE

Procedures for changing speaker line voltage and replacing fuses for the power amplifier modules.

2. VX-3004F, VX-3008F, AND VX-3016F VOICE EVACUATION FRAME

Instructions for installing digital power amplifier modules and configuring zone allocation settings via DIP switches.

3. VX-300LO LINE OUTPUT MODULE

3.1. THE ID NUMBER SETTING

Guide to setting the VX-3000F's unique ID number using DIP switches for system identification.

3.2. SETTING THE IP ADDRESS

Procedure to set the VX-3000F's IP address using DIP switches or the VX-3000 Setting Software.

4.1. SETTING THE IP ADDRESS

Instructions for setting the IP address of the VX-3000PM using its internal DIP switches.

5.1. SETTING THE IP ADDRESS

Guide to setting the IP address for the VX-3000CT control panel via its DIP switches.

6.1. THE ID NUMBER SETTINGS

Instructions for setting the ID number for RM-200SF, RM-300X, and RM-500 microphones using DIP switches.

6.4. CPU OFF FUNCTION (ALL-ZONE EMERGENCY BROADCAST) SETTINGS

8. CONNECTIONS

Detailed procedures for making various electrical connections using terminal blocks and cables.

9. SPEAKER LINE INITIAL SETTING

Procedure to set initial impedance values for speaker line surveillance and adjust OPEN/SHORT sensitivity.