Toa VX-015DA User Manual

INSTALLATION MANUAL
INTEGRATED VOICE EVACUATION SYSTEM
VX-3000 SERIES
Thank you for purchasing TOA’s Integrated Voice Evacuation System.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
1134
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg, Germany
1134-CPR-195
EN 54-16: 2008
Fire Detection and fire alarm systems - part 16: Voice alarm control and
indication system for fire detection and fire alarm systems for buildings
Options:
Manual silencing of voice alarm condition
manual reset of voice alarm condition
voice alarm condition output
indication of a fault related to voice alarm zones
voice alarm manual control
emergency microphones
redundant power amplifiers
16
DOP 16-004
When an EN 54-16 compliant VX-3000 system has to be installed, then carefully read the separate manual
titled "APPENDIX: ADDITIONAL INSTALLATION INSTRUCTIONS FOR AN EN 54-16 COMPLIANT
SYSTEM" and follow up the installation and configuration requirements explained therein. This APPENDIX
contains the basic description of settings and installations, so please refer to the general instruction
sections in this document for more details.

Toa VX-015DA Specifications

General

Frequency Response	50 Hz - 15 kHz
Directivity	Unidirectional
Impedance	600 ohms
Connector	XLR
Power Source	DC 12 V
Operating Temperature	-10°C to +50°C
Finish	Black

Summary

Chapter 1: NOTE

1. SAFETY PRECAUTIONS

Critical safety instructions and warnings for handling and installing the equipment.

Chapter 2: NOMENCLATURE AND FUNCTIONS

1. VX-3004F/3008F/VX-3016F VOICE EVACUATION FRAME

Front and rear panel layouts and identification of components for the main frame.

2. VX-015DA/030DA/050DA DIGITAL POWER AMPLIFIER MODULE

Description of the digital power amplifier modules, including front and rear panel views.

Chapter 3: INSTALLATION AND SETTING PROCEDURES (HARDWARE)

1. VX-015DA, VX-030DA, AND VX-050DA DIGITAL POWER AMPLIFIER MODULE

Step-by-step guide for installing and replacing fuses in power amplifier modules.

2. VX-3004F, VX-3008F, AND VX-3016F VOICE EVACUATION FRAME

6. RM-200SF, RM-300X, AND RM-500 MICROPHONES

Procedures for setting device ID numbers for remote microphones.