Toa VX-015DA - 2. VX-3004 F, VX-3008 F, AND VX-3016 F VOICE EVACUATION FRAME

3-3
Chapter 3 INSTALLATION AND SETTING PROCEDURES (HARDWARE)
2. VX-3004F, VX-3008F, AND VX-3016F VOICE EVACUATION FRAME
2.1. Installing VX-015DA/030DA/050DA Digital Power Amplifier Module
Multiple Digital power amplier modules can be installed in each VX-3000F unit. The number of the Digital
Power Amplier modules to be installed and their mounting slot ports differ depending on the zone and amplier
module congurations.
[Configuration and mounting slot port in the VX-3004F]
Without standby amplier With standby amplier
1 2 3 4/STANDBY 1 2 3 4/STANDBY
0-Zone
No conguration settable
�
1AB-Zone
�
�
�
2AB-Zone
�
�
�
�
�
3AB-Zone
�
�
�
�
�
�
�
4AB-Zone
�
�
�
�
No conguration settable
[Configuration and mounting slot port in the VX-3008F]
Without standby amplier With standby amplier
1 2 STANDBY 1 2 STANDBY
8 speaker selectors
No conguration settable
1 Channel, 8 speaker selectors
�
�
�
2 Channels, 8 speaker selectors
�
�
�
�
�
[Configuration and mounting slot port in the VX-3016F]
Without standby amplier With standby amplier
1 2/STANDBY 1 2/STANDBY
16 speaker selectors
No conguration settable
1 Channel, 16 speaker selectors
�
�
�
2 Channels, 8 speaker selectors
�
�
No conguration settable
The power amplier to be installed as a standby amplier must have the rated power output equal to or larger
than the maximum output of the power ampliers which share the standby amplier.
Legend
�
: Installation required
: Installation not required