3-56
Chapter 3
INSTALLATION AND SETTING PROCEDURES (HARDWARE)
7.1. Affixing Declaration of Compliance (EN 54-16 Standard)
To declare that the VX-3000F complies with EN 54-16, afx the sticker supplied with the VX-3000F visible to
the front panel of the equipment (e.g. at the upper right side as shown below).
Rack
EN 54-16
EN 54-16
Sticker (supplied with the VX-3000F)
Affix only the upper part of the
sticker to the equipment rack.
Paste this sticker on the outside
of the cabinet rack containing
the so certified equipment.
To Next Page
Loading...
