EasyManua.ls Logo

Toa WM-5220 User Manual

Toa WM-5220
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Thank you for purchasing TOA's UHF Wireless Microphone.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
WM-5220UHF WIRELESS MICROPHONE
INSTRUCTION MANUAL
1. SAFETY PRECAUTIONS
Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
To prevent the electromagnetic wave from badly influencing medical equipment, make sure to switch off the
unit's power when placing it in close proximity to the medical equipment.
When the unit is not in use for 10 days or more, be sure to take the battery out of the unit because battery
leakage may cause personal injury or contamination of environment.
Make sure to observe the following handling precautions so that a fire or personal injury does not result from
leakage or explosion of the battery.
· Do not short, disassemble, heat nor put the battery into a fire.
· Never charge batteries of the type which are not rechargeable.
· Do not solder a battery directly.
· Be sure to use the specified type of battery.
· Note correct polarity (positive and negative orientation) when inserting a battery in the unit.
· Avoid locations exposed to the direct sunlight, high temperature and high humidity when storing batteries.
CAUTION TO USER: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
Question and Answer IconNeed help?

Do you have a question about the Toa WM-5220 and is the answer not in the manual?

Toa WM-5220 Specifications

General IconGeneral
TypeWireless microphone
ModulationFM
RF Output Power10 mW
Polar PatternUnidirectional
Power SourceAA Battery
Operating Range100 m (approx.)
Modulation TypeFrequency Modulation
Dynamic RangeOver 90 dB
Microphone ElementCondenser type
Battery LifeApprox. 10 hours (alkaline)

Summary

Safety Precautions

Safety Symbol and Message Conventions

Explains safety symbols and messages used in the manual for hazard awareness and understanding potential safety hazards.

Hazard Warning and Caution Statements

Indicates potentially hazardous situations that could result in death, serious personal injury, or property damage if mishandled.

User Modification Disclaimer

Warns that unauthorized changes or modifications void the user's authority to operate the equipment.

General Description and Features

General Description

Describes the TOA WM-5220 Wireless Microphone's electret condenser element, sensitivity, sound quality, and suitability for speech.

Key Features

Highlights selectable frequencies, PLL synthesizer, battery indication, AA battery operation, and built-in antenna.

Handling Precautions and Nomenclature

Handling Precautions

Instructions to avoid exposing the unit to water, rain, extreme temperatures, humidity, or seawater; proper cleaning and placement.

Nomenclature Overview

Identifies key components of the wireless microphone, including power/battery lamps and switches, with visual aids.

Operation and Setup

Battery Insertion and Replacement

Step-by-step guide for inserting an AA battery and information on battery life and replacement indicators.

Channel Number Setting

Procedure for setting the channel selector switch to match the wireless tuner for proper signal reception.

Basic Operation

Steps to confirm channel numbers, turn the unit on, and verify the green LED indicator for proper operation.

Operational Hints

Provides advice on service distance, signal dropouts, interference, and who to contact for further assistance.

Specifications and Requirements

Technical Specifications

Detailed technical data including microphone element, modulation, frequency range, channels, power, and dimensions.

Included Accessories

Lists the accessories provided with the wireless microphone, such as a holder, screwdriver, and storage case.

License Requirements

Information regarding Industry Canada (IC) and FCC compliance, including restrictions on antenna or device modifications.

Related product manuals