EasyManua.ls Logo

Toa WM-5270 User Manual

Toa WM-5270
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Thank you for purchasing TOA's UHF Wireless Microphone.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
WM-5270UHF WIRELESS MICROPHONE
INSTRUCTION MANUAL
To prevent the electromagnetic wave from badly influencing medical equipment, make sure to switch off the
unit's power when placing it in close proximity to the medical equipment.
When the unit is not in use for 10 days or more, be sure to take the battery out of the unit because battery
leakage may cause personal injury or contamination of environment.
Make sure to observe the following handling precautions so that a fire or personal injury does not result from
leakage or explosion of the battery.
· Do not short, disassemble, heat nor put the battery into a fire.
· Do not solder a battery directly.
· Be sure to use the specified type of battery.
· Note correct polarity (positive and negative orientation) when inserting a battery in the unit.
· Avoid locations exposed to the direct sunlight, high temperature and high humidity when storing batteries.
Attention should be drawn to the environmental aspects of battery disposal.
CAUTION TO USER: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
1. SAFETY PRECAUTIONS
Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
2. GENERAL DESCRIPTION
The TOA's WM-5270 Wireless Microphone employs a dynamic microphone with high input handling capacity,
and is suitable for vocal use.
3. FEATURES
One frequency can be selected from 64 frequencies (16 channels x 4 banks) of 636 – 698 MHz.
An optimized PLL-synthesizer minimizes the oscillation frequency drift resulting from the ambient
temperature or voltage fluctuation.
The maximum input sound pressure can be set in the range of 130 dB SPL to 142 dB SPL by a PAD switch,
permitting adaptation to wide range of input sound pressure.
Power/Battery lamps indicate battery consumption to prevent the unit from malfunctioning when the battery
level remarkably decreases.
Operates on a single AA battery.
Employs a built-in antenna.
The state of battery consumption can be displayed on the tuner's indicator when the unit is used in
conjunction with the optional WT-5800, WT-5805 or WT-5810 Wireless Tuner.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
Question and Answer IconNeed help?

Do you have a question about the Toa WM-5270 and is the answer not in the manual?

Toa WM-5270 Specifications

General IconGeneral
TypeWireless microphone
ModulationFM
RF Output Power10 mW
Polar PatternUnidirectional
ConnectorXLR
Microphone ElementElectret Condenser
Power SourceAA Battery
Impedance600 ohms
Operating TimeApprox. 13 hours (with alkaline battery)

Summary

Safety Precautions

Warning

Indicates a potentially hazardous situation resulting in death or serious personal injury if mishandled.

Caution

Indicates a potentially hazardous situation resulting in moderate or minor personal injury or property damage if mishandled.

General Description

Features

Handling Precautions

General Handling Precautions

Covers avoiding water, modifications, dropping, extreme temperatures, seawater, proper cleaning, and avoiding interference.

Nomenclature

Pad Switch

Adjusts microphone sensitivity by 0, -6, or -12 dB for optimal sound input.

Channel Selector Switch

Sets the wireless microphone to the correct channel for tuner reception.

Power/Battery Lamps

Indicates battery status with green (sufficient) and red (low) LEDs.

Power ON/OFF Switch

Turns the microphone power on or off by pressing for more than one second.

Replacing the Battery

Battery Replacement Guide

Step-by-step instructions for replacing the AA battery and its expected life.

Channel Number Setting

Pad Switch

Operation

Operational Hints

Operational Hints and Tips

Provides guidance on service distance, interference, contact, sensitivity adjustment, and preventing rolling.

Specifications

Related product manuals