Need help?Do you have a question about the Toa WM-D5200 and is the answer not in the manual?
General| Frequency Response | 50 Hz - 15 kHz |
|---|---|
| RF Output Power | 10 mW |
| Type | Wireless Microphone |
| Frequency Range | UHF |
| Power Supply | AA battery x 2 |
| Polar Pattern | Cardioid |
| Impedance | 600 ohms |
| Directivity | Cardioid |
| Cable Length | N/A (Wireless) |
Covers critical safety warnings, cautions, and handling advice for safe operation and to prevent hazards.
Details the power switch, battery checker indicator, and microphone grip with its compartment.
Explains internal switches for bank/channel selection, encryption, code settings, and transmission output.
Step-by-step guide for inserting AA or rechargeable batteries and interpreting the battery checker's color codes.
Provides detailed instructions and cautions for charging the WB-2000 rechargeable battery using the BC-2000 charger.
Procedure for synchronizing the microphone's bank and channel numbers with the wireless receiver.
Explains encryption purpose, status confirmation, and prepares for enabling.
Step-by-step instructions to switch the encryption function from OFF to ON, including pairing with the receiver.
Step-by-step instructions to switch the encryption function from ON to OFF.
Procedure for setting a specific code number when the encryption function is off for enhanced security.
Details how to select transmission output power (H/L) for optimal range and interference management.
Instructions for setting the microphone sensitivity to 'H' (0 dB) or 'L' (-10 dB) using the selector switch.
Lists the standard accessories provided with the WM-D5200, such as a storage case and screwdriver.
To Next Page
