Intended use
The Tobii X60/X120 Monitor Mount is used in test situations where the stimuli is shown on a monitor
and an X60 or an X120 Tobii Eye Tracker will be used. The X60/X120 Monitor Mount provides a
fixed geometry for the eye tracker and monitor. This means that once the X60/X120 Monitor Mount
and monitor have been configured in relation to each other, the setup as a whole can be adjusted for
each participant without impacting the quality of the eye tracking data.
Parts & construction
The Tobii X60/X120 Monitor Mount consists of a metal frame, a plate for attaching the monitor, a
digital angle gauge and a set of screws. It is delivered with a special arm, which allows for flexible
setups in terms of angles and heights. The arm and X60/X120 Monitor Mount require some
assembly. The setup is suitable for monitors with a VESA
®
mount.
Product description
Technical specifications - X60/X120 Monitor Mount
Monitor sizes 43.2 to 59.7 cm diagonally (17’’ to 23.5’’)
Unit weight 4 kg (8.8 lb)
Default eye tracker angle 22º
Supported monitor mounts VESA
®
75 or 100
Technical specifications - Arm
Model 7500
Vertical range 45.7 cm (18’’), ±22.9 cm (9’’) from horizontal
Horizontal range 68.6 cm (27’’)
Rotation 360º at two joints
Monitor tilt 200º
Cable management Cables are concealed in arm
Max Load 19.9 kg (43.9 lb)
Unit weight 6 kg (13.2 lb)
To Next Page
Loading...