SELECT
Press SELECT to choose one of the eleven cooking presets that appear in the
three rows in the center of the panel.
+/- (Plus/Minus)
These buttons are use to increase (+) or decrease (-) the cooking time.
START/CANCEL
Pressing START/CANCEL after the cooking preset is selected will immediately
begin the operation. Pressing START/CANCEL at any time during the cycle will
stop the operation.
DELAY TIME
This function is used to delay the start time for any cooking preset in 30 minute
increments up to 24 hours.
• Select the desired cooking preset, then press DELAY TIME. The delayed
time is increased by 30 minutes each time DELAY TIME is pressed. Then
press START/CANCEL. The timer displays the time counting down to the
delayed start.
KEEP WARM
This keeps the temperature in the pressure cooker between 130
°
-150
°
F.
• After a cooking cycle is completed, the pressure cooker switches to the
KEEP WARM function automatically.
• The KEEP WARM function will operate with the lid on or off.
• To manually start the KEEP WARM function without the lid, press KEEP
WARM and the red light will indicate it is on. The timer will start counting
the minutes. The pressure cooker will heat to maintain the temperature
at 130
°
-150
°
F.
• If the KEEP WARM indicator light is illuminated, press CANCEL to end
the KEEP WARM function and to use other cooking presets.
To Next Page
Loading...