11
(3) Check the connection of oil re-circulation hose.
(4) Check the position of each linkage such as original position.
Choke linkage connection
Throttle and advance arm connection
Shift linkage connection
Carburetor and throttle linkage connection
(5) Check the harness connection such as original position
Each grand wire
Lanyard stop switch harness
Ignition coil harness
Charge coil harness
CDI unit harness
(6) Check the fuel hose such as original position.
Fuel hose to fuel filter (inlet side)
(7) Check the pilot hose such as original position.
To Next Page
Loading...
