EasyManua.ls Logo

TOHATSU M 4C - User Manual

TOHATSU M 4C
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S
MANUAL
トーハツ船外機オーナーズマニュアル
M B
Original instructions
M C
OB No.--DBB
EN

Table of Contents

Questions and Answers

  • A
    April KirbyAug 10, 2025
    Why is my TOHATSU M 4C engine failing to start?
    • U
      urobertsAug 10, 2025
      Several factors can cause a TOHATSU Outboard Motor engine to fail to start. It could be due to an empty fuel tank, which requires you to fill the fuel tank. Other potential causes include incorrect fuel system connections (check and correct them), air entering the fuel line (inspect for leaks and secure connections), a deformed or damaged fuel pipe (replace it), a closed air vent on the fuel tank (open it), or a clogged fuel filter, fuel pump, or carburetor (clean or replace the clogged components).
  • W
    williamherringAug 23, 2025
    What to do if TOHATSU Outboard Motor engine starts but stops soon?
    • N
      Natasha RoseAug 23, 2025
      If your TOHATSU Outboard Motor engine starts and then stops soon after, it might be due to several reasons. Using the improper engine oil or gasoline could be the cause; make sure to use the correct type. An excessive or insufficient amount of oil in the mixture, an excessive fuel supply, or poor carburetor adjustment can also cause this issue. Adjust the oil mixture, fuel supply, and carburetor accordingly.

TOHATSU M 4C Specifications

General IconGeneral
Engine Type4-Stroke
StartingManual
Cylinders1
Fuel SystemCarburetor
Gear Ratio2.15:1
Max. Output2.9 kW (4 HP)
Max Power4 hp (2.9 kW)
Fuel TypeUnleaded gasoline
Oil Type10W-30
Gear ShiftF-N
Shaft Length15 in. (Short)

Related product manuals