To Next Page
W
Willie OliverAug 8, 2025
Why is my TOHATSU Outboard Motor overheating?
- Aana63Aug 9, 2025
If your TOHATSU Outboard Motor engine is overheating, the issue might be propeller cavitation.
Why is my TOHATSU Outboard Motor overheating?
If your TOHATSU Outboard Motor engine is overheating, the issue might be propeller cavitation.
Why can't I get high engine speeds on my TOHATSU M 50D2 Outboard Motor?
If you cannot obtain high engine speeds on your TOHATSU Outboard Motor, a faulty thermostat could be the reason.
What causes the power trim & tilt to stop working on a TOHATSU M 50D2 Outboard Motor?
If the Power Trim & Tilt on your TOHATSU Outboard Motor is inoperative, check for insufficient battery capacity, loose terminals, or corrosion.
Explains the function and importance of the emergency stop switch and its tether for safety.
Emphasizes operator responsibility for safety and following regulations, stressing caution near people in water.
Outlines the critical break-in procedure for new outboard motors to ensure longevity and performance.
Step-by-step guide for starting different types of Tohatsu outboard motors, including safety precautions.
Instructions on how to safely shift between forward, neutral, and reverse gears, with critical safety warnings.
Essential checks to perform before and after each use to ensure safe operation and prevent breakdowns.
Actions to take and checks to perform after the outboard motor has impacted an underwater object.
Common causes and solutions for the engine failing to start or stopping soon after starting.
Addresses issues like poor idling, unstable running, abnormal speeds, and overheating.
General| Engine Type | 2-Stroke |
|---|---|
| Horsepower | 50 HP |
| Cylinders | 3 |
| Fuel Tank Capacity | 24 L |
| Starting System | Electric |
| Gear Ratio | 2.08:1 |
| Fuel Type | Gasoline |
| Oil Type | 2-Stroke Oil |
| Full Throttle RPM Range | 5000 - 6000 RPM |
| Fuel System | Carburetor |
| Max Power Output | 50 HP |
| Shaft Length | 20 in |
| Steering | Tiller |
