TOHATSU MFS 40A User Manual

ENGINE OPERATION46
7
ENOM00973-0
Neutral throttle button (Top
mount RC type)
ENOW00957-0
The control lever does not operate unless
the neutral lock arm is pulled.
The neutral throttle button is for warm-
up operation. (Not required for engine
starting) When the control lever is in
neutral, push and hold the neutral throt-
tle button. While holding the button,
move the lever forward to throttle up the
engine.
When the control lever is returned to the
neutral position, the button will reset
automatically.
1. Neutral throttle button
2. Forward
ENOM00-0
Trolling engine speed control
function
If the main switch key is pressed for 1
(one) second during idling or trolling
operation, engine revolution change.
Each time the main switch key is pressed
in the above manner, engine speed
changes as follows.
Starting
850min
-1
(rpm)
Ѝ
750min
-1
(rpm)
Ѝ
650min
-1
(rpm)
ЌࠉࠉࠉࠉࠉЎ
950min
-1
(rpm)
Ћ
850min
-1
(rpm)
Ћ
750min
-1
(rpm)
Buzzer short sounded one time, when set
to 650 min
-1
(rpm) engine speed, and tells
the lowest engine speed was set.
Buzzer short sounded twice, when set to
950 min
-1
(rpm) engine speed, and tells
the highest engine speed was set.
Reset the engine speed when after
engine restarted and or engine speed is
above 3,000 min
-1
(rpm), and then trolling
engine speed to be 850 min
-1
(rpm) as
standard.
In addition, this function does not oper-
ate when battery voltage is lower than
specified, set engine idle and trolling
engine speed to 850 min
-1
(rpm) auto-
matically.
CAUTION
1
2
ENOF00935-0
ON
1second
ENOF00876-0

TOHATSU MFS 40A Specifications

General

Brand	TOHATSU
Model	MFS 40A
Category	Outboard Motor
Language	English