TOHATSU MFS 40A User Manual

ENGINE OPERATION 51
7
Side mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
1. Control lever
2. Main switch key
2. Turn the main switch key to the OFF
position.
1. ON
2. START
3. OFF
ENOW00869-0
After stopping the engine:
z Close the air vent screw on the fuel tank
cap.
z Disconnect the fuel connector of the
engine and the fuel tank.
z Disconnect the battery cord, after each
use.
ENOM00975-0
Top mount RC type
1. Put the control lever in the Neutral
position and run the engine for 2-3
minutes at idling speed for cooling
down if it has been running at full
speed.
1. Control lever
2. Turn the main switch key to the OFF
position.
2. Main switch key
3. ON
4. START
5. OFF
WARNING
N
R
F
1
2
ENOF00881-1
1
2
3
ENOF00871-1
N
R
F
1
R
F
N
ENOF00939-0
5
3
4
2
ENOF00938-A1
5
3
4
2
ENOF02411-0

TOHATSU MFS 40A Specifications

General

Brand	TOHATSU
Model	MFS 40A
Category	Outboard Motor
Language	English