ENGINE OPERATION58
7
water inlet, potentially leading to engine
overheating.
1. Water inlet
ENOM00880-A
Gas assist type
1. Move (UP) lock lever to “Free” posi-
tion. Tilt up outboard motor into
desired shallow water running. While
keeping the outboard motor in the
desired shallow water running posi-
tion, move (DOWN) lock lever “Lock”
position.
1. Free position
2. Lock position
2. Return to normal running position
Move (UP) lock lever to “Free” posi-
tion. Outboard motor moves down to
thrust rod.
Move (DOWN) lock lever to “Lock”
position.
ENOM00069-A
Power Trim & Tilt type
1. Operate the Power Trim & Tilt switch
and tilt the outboard motor up into
desired shallow water running posi-
tion.
ENOF02437-0
DN
UP
To Next Page
Loading...
Need help?
General
