Need help?Do you have a question about the Tohnichi CEM10N3X8D-G-BTA and is the answer not in the manual?
General| Brand | Tohnichi |
|---|---|
| Model | CEM10N3X8D-G-BTA |
| Category | Measuring Instruments |
| Language | English |
Explains how the tool judges results based on set torque and angle thresholds, including judgment codes.
Details the two measurement modes: Inspection (MODE-M) and Tightening (MODE-T).
Explains how the tool measures and outputs angle data when specific communication formats are set.
Lists common error messages and provides troubleshooting solutions for each.
Describes how torque, angle, and detection settings are used for judgment in different modes.
Explains the alarm that activates when the measured torque exceeds the set limit.
Shows step-by-step examples of using the Tightening mode with specific settings.
Illustrates the operation of the Inspection mode with example settings and results.
Details the commands used to change settings remotely via external devices.
To Next Page