Tohnichi CEM200N3X19D-G-BTA - User Manual

1/35
MODEL CEM3-G-BTA
Instruction Manual

Summary

Outline and Features

Judgment Features

Explanation of how the tool judges results based on user-defined torque and angle thresholds.

Method of Operation

Button Operations

Description of functions for each button (Up, Down, MD, MEM, C, Power).

Torque and Angle Calibration

Procedure for calibrating the torque and angle functions of the tool.

Modes and Functions

Measurement Modes

Details on Inspection (MODE-M) and Tightening (MODE-T) modes.

Angle Measurement and Output

Error Messages

List of error codes and their corresponding solutions.

Over-Torque Alarm

Operation Examples

Tightening Mode Operation Example

Step-by-step guide for using the tool in Tightening mode (MODE-T).

Inspection Mode Operation Example

Step-by-step guide for using the tool in Inspection mode (MODE-M).

Communication and Settings

Bluetooth Power and Connection

External Output Format and Commands

Specifications, conditions, format, and input commands for data output.

8.1. Setting items

8.2. Setting procedure by key operation

Data Management

9.1. Batch measurement data output

9.2. Data processing function

9.3. Data clearance

Error Messages and Specifications

Troubleshooting Error Messages

List of error messages and their corresponding solutions.

Tohnichi CEM200N3X19D-G-BTA Specifications

General

Model	CEM200N3X19D-G-BTA
Category	Measuring Instruments
Type	Digital Torque Wrench
Capacity	200 N-m
Display	LCD
Interface	Bluetooth
Operating Temperature	0°C to 40°C
Torque Range (N-m)	40-200 N-m
Accuracy	±1%