tomado TAF1201B - Automatic Deactivation; Electromagnetic Fields (Emf)

• Always make sure the appliance is placed on an even, at
surface and is only used indoors.
• This appliance is only intended for household use and not for
use:
- in sta kitchens, shops, oces and other work environments;
- by guests in hotels, motels and other residenal environments;
- in Bed&Breakfast type environments;
- farms.
• If the appliance is not being used, or is being cleaned, fully
switch o the appliance and remove the plug from the socket.
• Allow the appliance to cool down for 30 minutes before storing
or cleaning it.
• Ensure that the ingredients being cooked in the appliance
come out golden-brown and not dark or brown. Remove burnt
parts.
• In case of a breakdown, never make repairs yourself; a tripped
safety device in the appliance could indicate a defect that
cannot be remedied by removing or replacing this safety
device. Only original parts should be used.
• This appliance is only suitable for household use. If the
appliance is not used as intended, no compensaon can be
claimed in case of defects or accidents and the warranty will
be invalidated.
EN - 14
The hot air fryer has been provided with an overheang safety system. If the interior temperature is too high, the appliance is
switched o automacally by the safety system. In that case, the appliance can no longer be used. Remove the plug from the
socket, allow the appliance to cool down and contact the service department of Inventum or your retailer.
This appliance has been provided with a mer. Once the mer has counted down to 0, a beep sound can be heard and the
appliance switches o automacally. To switch o the appliance manually, press the on and o key
once to stop the frying
process, and then press the on and o key a second me to switch o the display.
This appliance complies with all requirements relang to electromagnec elds (EMF).
OVERHEATING SAFETY SYSTEM
AUTOMATIC DEACTIVATION
ELECTROMAGNETIC FIELDS (EMF)