C-1
ACCESSORIES
C-1
GENERAL OPTIONS /ACCESSORIES
The following options/accessories are available for
your Tomahawk™ Plasma cutter from your local
Lincoln Distributor.
K2886-1 - Plasma Circle Cutting Kit - For cutting cir-
cles from 3” to 33” in diameter (77mm to 838mm).
TORCHES
The following replacement or optional torches are
available:
K2848-1 LC65 Handheld Plasma Torch 25' (7.5m)
K2848-2 LC65 Handheld Plasma Torch 50' (15m)
K2848-3 LC65M Mechanized Plasma Torch 25'
(7.5m)
EXPENDABLE PARTS
Refer to the torch parts decal located on your machine
or the parts pages at the back of this manual for the
specific part numbers required for each of these
setups.
TOMAHAWK™ 1000
To Next Page
Loading...