VANISH Operator’s Manual Page 97
PROCEDURE
Rear view of the unit showing location of charger plug
Inspect and replace the charger if it has been dropped •
or damaged in any way. Inspect the cords and
connectors for cracks and fraying. If cracks or frays are
detected, replace immediately.
Plug charger into appropriate 3-prong extension cord.
•
Watch Charger LED Indicator to verify charging has •
begun per next section,
Open the cargo box and any door enclosures or zippers.
•
This will decrease charger temperature, which allows it
to operate more efciently, and shorten charge times.
Always use extension cords with the appropriate ratings
for the country in which it is used. In North America
this is a UL rating. The cords must also be rated for
the conditions in which they are used, such as being
rated for protection from oil in a garage or workshop
environment.
To Next Page
