1-2
electric shock. When connecting a device to the instrument using the RS-232C
connector, contact Tomey Corporation or our local distributor.
– Ground the instrument appropriately. Otherwise you may get an electric shock.
– Do not hold the measuring head, chin rest, forehead pad, or joystick when
lifting the instrument. These components are detachable and the instrument
may drop, resulting in injuries.
– Install the instrument in a location not subject to direct sunlight, high
temperature and humidity, or air with significant dust, salt, and/or sulfur
content. These may cause failure or malfunction of the instrument.
– Install the instrument in a level and stable location free of vibration or
mechanical impact to ensure correct measurement, and prevent the instrument
from falling or being dropped, resulting in fire or fatal accidents.
– Install the instrument between the patient and physician so that they can face
with each other.
– Install the instrument in a location that it is sufficiently clear of any other
equipment that may interfere with the examination when using the instrument.
Precautions before using the instrument
– Check that all cables are connected correctly and completely.
– Check the sections that the patient will directly touch.
– Peel off the top sheet of chin rest paper and clean the forehead pad with a
cloth dampened with alcohol before measurement.
– Check that the instrument is correctly grounded.
– Check that the date set in the instrument conforms to the actual operation date
and time.
Precautions during operation
– Do not place any container with liquid in it on the instrument. Any liquid
entering the instrument may cause an electric shock or failure.
– If any smoke, offensive odor, or abnormal sound occurs, turn off the
instrument immediately, disconnect the power plug from the outlet, and contact
our local distributor or Tomey Corporation.
To Next Page
Loading...
Need help?
General
