1-1
1. PRIOR TO USE
Read this manual thoroughly before using the
instrument to ensure proper and safe operation.
Always follow the operation procedures described in
this manual.
Check that there is no device that generates
strong magnetic field near the instrument. The
strong magnetic field may cause noise and affect
measurement.
1.1 Precautions for operation
Only allow adequately skilled operators to use the instrument.
Precautions for installing the instrument
– Install the instrument in a location free of water or chemicals. Any water or
chemicals entering the instrument may cause an electric shock or failure.
– Do not install the instrument in a place where chemicals are stored or gases
may occur. Spilt chemicals or vapor may enter the instrument and ignite.
– Check the frequency, voltage, and allowable current (or power consumption)
of the power source. Operating the instrument connected to an inappropriate
power source may cause fire or an electric shock.
– Connect the power plug to a grounded 3P-outlet. Otherwise, a short circuit due
to failure of the instrument may result in an electric shock.
– Do not place any heavy object on the power cord or squash the power cord.
This may cause fire or an electric shock.
– Completely insert the power plug into the outlet. Faulty contact, allowing any
metal to contact exposed plug terminals, or dust accumulated on exposed plug
terminals may result in fire or an electric shock.
– Do not connect any device with data transmission specifications that are not
compatible with the instrument. Connecting such a device may cause fire or an
To Next Page
Loading...
Need help?
General
