1-4
– Refer to "5.6 Storing" for instructions on storing the instrument.
– Clean the instrument appropriately at the end of operation to get ready for the
next operation.
– Clean and neatly arrange the accessories and cables.
– If any smoke, offensive odor, or abnormal sound occurs, turn off the instrument
immediately, disconnect the power plug from the outlet, and contact our local
distributor or Tomey Corporation.
If any instrument failure occurs, stop operation immediately, indicate the failure,
and contact our local distributor to request repair.
– Never modify the instrument. Doing so may cause electric shock or failure of
the instrument. The instrument contains high-voltage sections. Touching these
sections will result in death or serious injuries.
– Disconnect the power cord from the outlet when replacing fuses. Otherwise
you may get an electric shock, resulting in death or serious injuries.
– Use the power cord and fuses provided with the instrument or specified by
Tomey to ensure safety. Also, do not use the accessories provided with the
instrument for other equipment.
– When any instrument failure occurs, indicate the failure, and contact our
local distributor to request inspection and repair. Do not attempt to repair the
instrument yourself.
– Conduct regular inspections of the instrument and components.
– When the instrument is not used for 1 month or longer, refer to "5.3 Inspection"
in this manual and check that the instrument is operating correctly and safely
before starting operation.
To Next Page
Loading...
Need help?
General
